LOCTITE 60 Second - Repair Gel CA, Translucent, 20g
Packaging Size Make your selection 20g
Color Make your selection Translucent
-
Non-drip gel formula: can be used for vertical applications and is easy to apply thanks to its thickness and nozzle applicator
-
Flexible and solvent-free: the universal adhesive can even be used on non-porous materials and dries transparent
-
Repositionable within 40 seconds: which makes it ideal for repairs at home
-
Extra strong: LOCTITE 60 Second reaches an adhesive power of up to 100 kg/m² within 24 hours and is ideally suited for larger surfaces
-
Delivery contents: 1 x 20g non-drip glue suitable for wood, metal, leather, ceramic, stone, rubber, and plastic (except for PE, PP and PTE)
LOCTITE 60 Seconds all-purpose glue bonds in just 60 seconds. No more waiting and no more clamping! It is extra strong & repositionable, ideal for all your repairs at home including larger surfaces. It is solvent-free and dries transparent and flexible. It is multimaterial and thanks to its non-drip gel formula it is ideal for vertical applications.
The LOCTITE glue reaches an adhesive power of up to 100 kg/m² within 24 hours. Ideal for leather, rubber, wood, metal, ceramic, paper, plastic, stone.
Shake tube before use. Ensure all surfaces to be bonded are clean, dry and close-fitting. Avoid skin contact with the glue. Gently squeezing the tube near the crimp end, apply a small amount (in thin beads or dots) of LOCTITE 60 Seconds Universal Glue to one of the surfaces to be bonded. Bring parts together immediately and hold by hand pressure, without disturbing the bond, for at least 1 minute.
Leave undisturbed for 10 minutes, or preferably overnight, to allow full bond strength to develop. Avoid spillages and protect work surfaces. Remove cured residues of LOCTITE 60 Seconds Universal Glue with LOCTITE Glue Remover. For best results, the bonds should be prepared at room temperature (15-25°C) and a minimum of 30% relative humidity. Bonding times may increase in very cold and/or dry ambient conditions.
For optimum product life, use only a minimum quantity of glue, wipe the nozzle with a tissue to remove excess adhesive, replace cap and store the pack in a cool, dry place.