LOCTITE® 243
-
Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
-
Works on all metals, including passive substrates (e.g. stainless steel, aluminum, plated surfaces)
-
Proven to tolerate minor contamination by industrial oils, e.g. motor oils, corrosion prevention oils and cutting fluids
-
Permits disassembly with ordinary hand tools for easy service and maintenance
-
P1 NSF Reg. No.: 123000
LOCTITE® 243 is a general purpose threadlocker that provides a medium strength bond. LOCTITE 243 works on all metals, including passive substrates such as stainless steel, aluminum and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g., motor oils, corrosion prevention oils and cutting fluid.
It is recommended to use LOCTITE® SF 7063, SF 7064, or SF 7070 to degrease and clean surfaces prior to applying threadlocker adhesive.
If cure speed is too slow due to passive metals (stainless steel, aluminum and plated metals) or low temperature (below 5°C), use activator LOCTITE® SF 7240 or LOCTITE® SF 7649 (see cure speed vs activator graph in the TDS).
Apply liquid threadlocker to the engagement area. For manual dispensing, the use of a peristaltic handgun or the LOCTITE® Pro Pump is recommended to ensure a consistent application volume.
Insert bolt and apply threadlocker to the exposed thread. Assemble nut and tighten to the correct/specified torque.
Assemble and tighten. If several bolts are being assembled, torque them down to the correct value within the fixture.