Loctite Spray Adhesive General Performance

Loctite® Spray Adhesive General Performance is a premium quality formulation that dries clear and has a superior bonding strength. It dries quickly and is ideal for a wide range of household and automotive repair projects. Loctite® Spray Adhesive General Performance will work on a variety of porous and nonporous substrates.

Key Facts

Recommended on

Bonding paper, cardboard, foam, fabric, leather, felt, cork, foil, certain plastics, metal, glass and wood

Properties

  • Temporary or repositionable bonding  
  • Variety of applications
  • Dries clear and will not yellow with age  
  • Can apply multiple coats  
  • Increases bond strength
  • No bleed through, wrinkling or curling  
  • No reworking

Step by step

HOW TO USE:

Step 1: Safety Precautions

Well-ventilated area, safety glasses.

Step 2: Preparation

Shake well before using. Apply adhesive between 18°C and 35°C. The can temperature should be at least 16°C. Surfaces must be clean, dry and free of foreign materials. Protect finished surfaces. Pre-fit all materials. Test substrates for compatibility before starting application.

Step 3: Application

Turn spray tip so that the black dot is aligned with the nozzle. Hold can in a vertical position and spray from a distance of 20 to 25 cm. Keep the can moving to create an even coat and avoid build-up on the surface. Start and stop the spray just off the work to prevent runs and sags. For a stronger immediate bond, apply an even coat of adhesive to both surfaces, allow to dry to tack (approximately 1 minute), and then bond materials.

Step 4: Cleanup

After use, invert spray can and spray for approximately 2 seconds (or until spray is free of adhesive) to clear valve and spray tip. Clean spray tip with turpentine or mineral spirits.

Note: When using solvents for cleanup, use proper precautionary measure.