Bonding a variety of construction materials such as wood, drywall, plaster, ceramic, concrete, masonry, brick, foam board and cork.
- It applies white and dries clear
- Instant grab: Reduces need for bracing and nailing
- Repositionable for 15 minutes: Ideal for precision alignment of surfaces
- Water-based: Low odor
- Soap & Water clean-up: Eliminates the use of chemicals
Step by step
HOW TO USE:
Use above 10°C One surface must be porous. Surfaces must be clean, dry and close mating. Painted surfaces must be cured and free of loose paint. To increase adhesion, sand glossy surfaces to a dull finish.
For small items, apply two beads to the back then press firmly into place.
For larger items, such as drywall or paneling, apply the adhesive around the perimeter 5 cm from the edge then apply additional beads at 30 cm intervals. Alternatively, apply the adhesive directly to studs.
Finishing nails are required for materials that may warp such as thin wood veneer. Heavy materials or ceiling applications will require spot nails and bracing support for 24 hours or until dry.
It is recommended to use at least one mechanical fastener for every 0.4 m2.